SYSTEM STATUS · 180+ STATIONS ON STREAM · ISO 9001 · ATEX · PED · MID
PL EN
● Precision gas systems Engineering since 1990

Gas systems
engineered precisely
to the standards global industry runs on.

inlet filter FT metering reduction superheat GC sample ESD shutdown GT / GRID delivery
Operating since
1990
Tarnowskie Góry, Poland. Four decades of continuous gas measurement.
Installed base
180+ stations
Turnkey SRP/MRP stations, biomethane and CCGT fuel‑prep systems — across the EU.
Meters legalised
1.4million units
Accredited metrological laboratory, MID module D — diaphragm, rotary, turbine.
Uptime, installed base
100%
Twelve‑month rolling average. The reliability operators plan around.
▸ ON STREAM WITH GAZ-SYSTEM ORLEN PGNiG JSW Grupa Azoty LOTOS Siemens Yokogawa Shell bp Honeywell Trans Adriatic Pipeline Resato Hydrogen Hexagon Purus ▸ ON STREAM WITH GAZ-SYSTEM ORLEN PGNiG JSW Grupa Azoty LOTOS Siemens Yokogawa Shell bp Honeywell Trans Adriatic Pipeline Resato Hydrogen Hexagon Purus
01Our principles

We build gas systems the way a shipyard builds hulls — to outlast the ones who commission them. Every weld, every calibration, every cable termination is logged, numbered and signed. If we install it under our name — it works, for decades, not quarters.

01 / PRINCIPLE

To spec. Every time.

P&IDs reviewed in HAZOP. Skids tested in FAT. Nothing leaves the workshop before its paperwork — and the paperwork is traceable to the last weld.

02 / PRINCIPLE

One accountable partner.

Process, mechanical, electrical, automation — under one roof, with one project engineer. We don't subcontract accountability.

03 / PRINCIPLE

Service for the full lifecycle.

Overhauls, re‑verification, spare parts and a 24/7 grid hotline. A partnership that doesn't end at commissioning — and rarely does, forty years on.

02Product catalogue

Thirteen product lines, one engineering standard.

Metering, reduction, quality analysis, fuel‑gas preparation and hydrogen infrastructure — plus the complete, custom‑engineered systems that integrate them. Every line is manufactured, legalised and commissioned by the same team that designed it.

SCROLL / HOVER A ROW FOR SPECIFICATIONS

P/00 ◆

IGAZ Gas Meter

Flagship product · diaphragm gas meter · MID · smart-ready
Our flagship diaphragm meter — metrological precision, decade‑class durability and remote‑read readiness. Manufactured and legalised entirely in‑house in Tarnowskie Góry.
SizeG1.6 – G6
ConnectionDN20 – DN40
Qmaxup to 10 m³/h
ComplianceMID module B + D
P/01 ●

BK-G Diaphragm Meters

Domestic and light commercial · MID
Legalised batches of diaphragm meters for distribution operators — manufactured and verified in our accredited laboratory. Over 1.4 million units delivered.
SizeG1.6 – G6
ConnectionDN20 – DN40
Temperature−25…+55 °C
Warrantyup to 120 months
P/02 ●

RABO Rotary Meters

Industrial · fiscal · DN40 – DN150
RABO rotary meters for precise fiscal measurement at industrial off‑takers — high resolution at variable and low flows.
SizeG16 – G650
Pressureup to 1.6 MPa
Accuracy± 1 %
StandardEN 12480 · MID
P/03a ●

TRZ2 Turbine Meters

Medium and high flows · DN50 – DN200
TRZ2 turbine meters for fiscal measurement of medium and high flows in distribution and at large off‑takers.
SizeG65 – G2500
Pressureup to 4 MPa
OutputHART · NF/HF pulse
StandardEN 12261 · MID
P/03b ●

SM-RI-X Turbine Meters

High pressure · transmission · DN100 – DN300
SM-RI-X turbine meters for fiscal measurement in transmission and at high‑pressure stations — with full diagnostics and SCADA outputs.
SizeG400 – G6500
Pressureup to 10 MPa
OutputHART · RS-485 · Modbus
StandardEN 12261 · AGA-7
P/04 ●

Q.Sonic Ultrasonic Meters

Fiscal · multi-path · no moving parts
Multi‑path Q.Sonic ultrasonic meters (AGA‑9 / ISO 17089) with full diagnostics — zero pressure drop, no moving parts.
Paths5 / 7 / 10
ClassFiscal / custody transfer
Pressureup to 16 MPa
StandardISO 17089 · AGA-9
P/05 ●

Elster Quantometer Q & QA

Industrial volume metering · turbine · ATEX (QA)
Elster Q and QA series quantometers — industrial turbine meters for consumption metering at medium‑ and low‑pressure off‑takers. The QA model comes in an ATEX version.
SizeG16 – G1000
Pressureup to 1.6 / 4.0 MPa
Ex zoneQA: ATEX II 2G
StandardMID · EN 12261/12480
A/01 ●

Gas Chromatographs

Process · online · ISO 6976
Process chromatographs for real‑time gas composition and calorific‑value measurement — integrated with flow computers for energy allocation and billing.
Cycle≤ 3 min
Repeatability0.01 MJ/m³
CalibrationAutomatic
StandardISO 6976 · 10723
A/02 ●

Analyser Skids

ATEX skids and shelters · sample conditioning
Complete ATEX‑zone analyser skids and shelters — chromatograph, moisture and H₂S analysers, sample conditioning, climate control and Ex electrical. FAT‑tested.
ZoneATEX 1 / 2
Ex classEx d / Ex e / Ex p
Streamsup to 8
EquipmentHVAC · F&G · sampling
A/03 ◆

Biomethane Upgrading

Containerised · RED II · grid-ready
Complete, containerised biomethane cleaning and upgrading plants: CO₂ removal, drying, quality verification, odourisation, pressure reduction and fiscal metering.
Capacity100 – 2,500 Nm³/h
Wobbe control± 0.2 MJ/m³
Delivery18 – 22 wk
StandardRED II · ISCC-EU
S/01 ●

SRP/MRP Reduction & Metering Stations

HP · MP · LP — active / monitor line
Complete SRP/MRP stations engineered to the site — regulators, isolation and relief valves, odourisation and fiscal metering, commissioned to SCADA.
Inletup to 8.4 MPa
Outlet0.1 – 1.6 MPa
Capacityup to 80,000 Nm³/h
RedundancyActive / Monitor
S/02 ◆

CCGT Fuel-Gas Preparation Systems

Turbine-grade · dual-fuel · GT/EPC-ready
Complete fuel‑gas conditioning trains for combined‑cycle and cogeneration plants: filter‑coalescer, heater, fiscal metering, reduction and ESD.
Capacityup to 120,000 Nm³/h
Inletup to 8.4 MPa
Superheat+20 K min.
StandardEN 1776 · API 6D
S/03 ◆

Hydrogen Systems

350/700 bar refuelling stations · H₂ transport
Turnkey hydrogen refuelling stations (350/700 bar) and Type 4 cylinder transport bundles — with partners Resato, MAXIMATOR Hydrogen, Hexagon Purus.
Pressure350 / 700 bar
Capacity200 – 2,000 kg/day
ProtocolSAE J2601 A/B/C/D
TransportType 4 · up to 1,100 kg H₂
03Engineering in-house

From P&ID to as-built documentation.

Design, prefabrication, installation, commissioning — one contract, one project engineer. Process, mechanical, electrical and automation engineers sit side by side — nothing is outsourced, nothing is re‑learned from scratch between disciplines.

03 / i · Process design

Clear, verifiable, precise process documentation.

Every Intergaz system is built on a reviewed P&ID, line list, instrument index and cause‑and‑effect matrix — documents your approving engineer already knows and trusts.

  • a.
    P&IDs per ISA S5.1 / ISO 10628Revision control: IFA → IFC → as-built
  • b.
    HAZOP and LOPA facilitationSIL verification per IEC 61511, with your approving engineer on site
  • c.
    Relief valve sizing per API 520 / 521Flare and vent dispersion modelling where the site requires it
  • d.
    Functional safety and C&E matricesESD and F&G logic, fully tested and signed off in FAT
03 / ii · 3D mechanical design

Every skid, every shelter — modelled first, fabricated second.

Before we cut a single metre of pipe, we model the whole installation in 3D. You receive a navigable model, interference‑free piping, weight‑balanced transport frames and a complete fabrication package.

  • a.
    Parametric skid and shelter modelsCentre-of-gravity and transport reports
  • b.
    Routed piping and isometric drawingsSpool sheets and weld maps, ready for the workshop
  • c.
    Steelwork and weldment packagePainted to ISO 12944 for offshore and coastal sites
  • d.
    Clash-free model handoverIntegrated with your plant model
04Anatomy of a system

How Intergaz engineers the fuel-gas preparation train for a CCGT.

V‑101 INLET 8.4 MPa F‑101 FILTER / COALESCER FT FE‑102 USM METER PCV‑103 REGULATOR E‑104 HEATER · +20K AI‑105 GC SAMPLE TAP ESD SDV‑106 EMERGENCY SHUTDOWN GT TURBINE SIEMENS / GE / MAN FLOW ▸▸▸ CH₄ · C₂H₆ · CO₂ · N₂ — CCGT FUEL, 8.4 MPa AT INLET, 2.7 MPa AT TURBINE
01 · Inlet conditioning

Double block‑and‑bleed, filter‑coalescer to 99.98% at 0.3 µm, low‑pressure shutdown.

02 · Fiscal measurement

Ultrasonic meter with EVC and redundant p/T measurement — AGA‑9 compliant, ± 0.5% class.

03 · Conditioning

Active/monitor regulation plus electric or glycol superheat to +20 K above dew point.

04 · Protection

SIL‑rated ESD valve, F&G detection, 2oo3 logic, MOC per IEC 61511 — signed off in FAT.

05How we deliver

Five stages. One contract.

From first enquiry to signed as‑built documentation — the same project engineer accountable at every stage.

01
Enquiry and concept
Stage 01 · Week 0–2

Enquiry, sizing and concept

Process data review, meter and equipment sizing, preliminary heat and mass balance, a budgetary offer with a realistic lead time.

OutputConcept + budget offer
Stage 02 · Week 2–8

Detailed engineering

P&ID to IFA, datasheets, instrument index, HAZOP workshop, SIL determination, 3D model and full fabrication drawings.

OutputIFC drawing package
Stage 03 · Week 8–18

Manufacture and factory test

Skid fabrication, welding, pressure test, painting, electrical assembly and a witnessed factory acceptance test.

OutputSigned FAT protocol
Stage 04 · Week 18–22

Installation and commissioning

Site delivery, mechanical and electrical hook‑up, purge, loop checks, SCADA integration and a site acceptance test with the operator present.

OutputSAT + as-built documentation
Stage 05 · Lifecycle

Service, re-verification and overhaul

Scheduled maintenance, MID re‑verification in our own laboratory, spares held in stock and a hotline for grid operators.

ResponseEU-wide service
06Quietly, since 1990

Four decades of gas work, in numbers.

Numbers we track. Each one is the result of one team, steadily getting better at its work — not a headline strategy.

Years on stream
43yrs
Continuous gas measurement, since 1990.
Meters legalised
1.4million
Diaphragm, rotary, turbine — our own MID‑D line.
Systems delivered
180+
Turnkey stations, biomethane plants, CCGT skids.
Uptime
99.7%
12‑month rolling average, installed base.
07Selected projects

Delivered quietly, still on stream.

Selected projects from our reference portfolio — the full list is on the Projects page.

SCROLL ▸

ORLEN
Włocławek · Power generationGas preparation station for a CCGT block
PL · Kuyavia-Pomerania

Design (3D), supply, installation and commissioning of a complete gas preparation station: filtration, metering, reduction, heating, process analytics and boiler house — with automatic line switching and DCS integration.

Capacityup to 100,000 Nm³/h
Boiler house3 × 1 MW
ScopeTurnkey
ORLEN
Dolna Odra · Power generationGas preparation station for a CCGT block
PL · West Pomerania

Design, supply, installation and commissioning of a complete gas preparation station for a combined‑cycle block: filtration, metering, reduction, heating and process analytics, with DCS integration and remote control.

Capacityup to 250,000 Nm³/h
Boiler house3 × 3.5 MW
ScopeTurnkey
GAZ-SYSTEM · NET4GAS
Cieszyn · TransmissionPL–CZ border metering station
PL / CZ · border

Design, supply and commissioning of two DN300 ANSI600 fiscal metering lines with Q‑Sonic and SM‑RI‑2 meters with automatic lubrication — fiscal measurement between Poland and the Czech Republic.

Pressure50 bar
Lines2 × DN300
MetersQ-Sonic · SM-RI-2
HONEYWELL
France · UK · GermanyInstallations with the Encal 3000 process chromatograph
Biogas quality analysis

Complete installations with the Honeywell Encal 3000 process chromatograph for grid‑injected biogas quality analysis — 3D design, supply chain build, prefabrication, FAT and delivery.

France350 units
UK20 units
Germany8 units
GAZ-SYSTEM
Kościan · Gustorzyn · OdolanówPoland's largest transmission hubs
PL · Transmission

Design, supply and commissioning of 60 metering lines with Q‑SonicPLUS DN300 ANSI600 ultrasonic meters and two complete sets of process chromatographs — process measurement at the hub.

Metering lines60
Accuracy± 0.5 %
MeterQ-SonicPLUS
All projects
08Standards · certifications · accreditations
ISO 9001
Quality
MID Module D
Measuring instruments
ATEX 2014/34/EU
Explosive atmospheres
PED 2014/68/EU
Pressure equipment
IEC 61511 · SIL
Functional safety
AGA‑9 · ISO 17089
Ultrasonic measurement
ISO 6976 · 10723
Gas calorific value
EN 1776 · 12186
Gas stations
ISCC‑EU · RED II
Biomethane sustainability
09Contact

Tell us what you're building.

A single meter replacement or a 120,000 Nm³/h CCGT fuel‑preparation train — send us the brief. We'll reply with next steps and a realistic lead time.

Sales and quotes
Quotes and technical enquiries
Service and re-verification
Re-verification, inspections, repairs