SYSTEM STATUS · 180+ STATIONS ON STREAM · ISO 9001 · ATEX · PED · MID
PL EN
● Precision gas systems Engineering since 1990

Gas systems engineered precisely to the standards global industry runs on.

For over four decades, Intergaz has designed, manufactured and commissioned the metering, reduction, analysis and fuel‑preparation systems that keep Europe's gas grid — and the plants connected to it — on stream.

Gas mix in frame
CH₄ methane 94 %
H₂ hydrogen 3 %
C₂H₆ · C₃H₈ · C₄H₁₀ 2.75 %
N₂ nitrogen 0.25 %
inlet filter FT metering reduction superheat GC sample ESD shutdown GT / GRID delivery
Operating since
1990
Tarnowskie Góry, Poland. Four decades of continuous gas measurement.
Installed base
180+ stations
Turnkey SRP/MRP stations, biomethane and CCGT fuel‑prep systems — across the EU.
Meters legalised
1.4million units
Accredited metrological laboratory, MID module D — diaphragm, rotary, turbine.
Uptime, installed base
100%
Twelve‑month rolling average. The reliability operators plan around.
▸ ON STREAM WITH GAZ-SYSTEM ORLEN PGNiG JSW Grupa Azoty LOTOS Siemens Yokogawa Shell bp Honeywell Trans Adriatic Pipeline Resato Hydrogen Hexagon Purus ▸ ON STREAM WITH GAZ-SYSTEM ORLEN PGNiG JSW Grupa Azoty LOTOS Siemens Yokogawa Shell bp Honeywell Trans Adriatic Pipeline Resato Hydrogen Hexagon Purus
01Our principles

We build gas systems the way a shipyard builds hulls — to outlast the ones who commission them. Every weld, every calibration, every cable termination is logged, numbered and signed. If we install it under our name — it works, for decades, not quarters.

01 / PRINCIPLE

To spec. Every time.

P&IDs reviewed in HAZOP. Skids tested in FAT. Nothing leaves the workshop before its paperwork — and the paperwork is traceable to the last weld.

02 / PRINCIPLE

One accountable partner.

Process, mechanical, electrical, automation — under one roof, with one project engineer. We don't subcontract accountability.

03 / PRINCIPLE

Service for the full lifecycle.

Overhauls, re‑verification, spare parts and a 24/7 grid hotline. A partnership that doesn't end at commissioning — and rarely does, forty years on.

02Product catalogue

Thirteen product lines, one engineering standard.

Metering, reduction, quality analysis, fuel‑gas preparation and hydrogen infrastructure — plus the complete, custom‑engineered systems that integrate them. Every line is manufactured, legalised and commissioned by the same team that designed it.

SCROLL / HOVER A ROW FOR SPECIFICATIONS

P/00 ◆

IGAZ Gas Meter

Flagship product · diaphragm gas meter · MID · smart-ready
Our flagship diaphragm meter — metrological precision, decade‑class durability and remote‑read readiness. Manufactured and legalised entirely in‑house in Tarnowskie Góry.
SizeG1.6 – G6
ConnectionDN20 – DN40
Qmaxup to 10 m³/h
ComplianceMID module B + D
P/01 ●

BK-G Diaphragm Meters

Domestic and light commercial · MID
Legalised batches of diaphragm meters for distribution operators — manufactured and verified in our accredited laboratory. Over 1.4 million units delivered.
SizeG1.6 – G6
ConnectionDN20 – DN40
Temperature−25…+55 °C
Warrantyup to 120 months
P/02 ●

RABO Rotary Meters

Industrial · fiscal · DN40 – DN150
RABO rotary meters for precise fiscal measurement at industrial off‑takers — high resolution at variable and low flows.
SizeG16 – G650
Pressureup to 1.6 MPa
Accuracy± 1 %
StandardEN 12480 · MID
P/03a ●

TRZ2 Turbine Meters

Medium and high flows · DN50 – DN200
TRZ2 turbine meters for fiscal measurement of medium and high flows in distribution and at large off‑takers.
SizeG65 – G2500
Pressureup to 4 MPa
OutputHART · NF/HF pulse
StandardEN 12261 · MID
P/03b ●

SM-RI-X Turbine Meters

High pressure · transmission · DN100 – DN300
SM-RI-X turbine meters for fiscal measurement in transmission and at high‑pressure stations — with full diagnostics and SCADA outputs.
SizeG400 – G6500
Pressureup to 10 MPa
OutputHART · RS-485 · Modbus
StandardEN 12261 · AGA-7
P/04 ●

Q.Sonic Ultrasonic Meters

Fiscal · multi-path · no moving parts
Multi‑path Q.Sonic ultrasonic meters (AGA‑9 / ISO 17089) with full diagnostics — zero pressure drop, no moving parts.
Paths5 / 7 / 10
ClassFiscal / custody transfer
Pressureup to 16 MPa
StandardISO 17089 · AGA-9
P/05 ●

Elster Quantometer Q & QA

Industrial volume metering · turbine · ATEX (QA)
Elster Q and QA series quantometers — industrial turbine meters for consumption metering at medium‑ and low‑pressure off‑takers. The QA model comes in an ATEX version.
SizeG16 – G1000
Pressureup to 1.6 / 4.0 MPa
Ex zoneQA: ATEX II 2G
StandardMID · EN 12261/12480
A/01 ●

Gas Chromatographs

Process · online · ISO 6976
Process chromatographs for real‑time gas composition and calorific‑value measurement — integrated with flow computers for energy allocation and billing.
Cycle≤ 3 min
Repeatability0.01 MJ/m³
CalibrationAutomatic
StandardISO 6976 · 10723
A/02 ●

Analyser Skids

ATEX skids and shelters · sample conditioning
Complete ATEX‑zone analyser skids and shelters — chromatograph, moisture and H₂S analysers, sample conditioning, climate control and Ex electrical. FAT‑tested.
ZoneATEX 1 / 2
Ex classEx d / Ex e / Ex p
Streamsup to 8
EquipmentHVAC · F&G · sampling
A/03 ◆

Biomethane Upgrading

Containerised · RED II · grid-ready
Complete, containerised biomethane cleaning and upgrading plants: CO₂ removal, drying, quality verification, odourisation, pressure reduction and fiscal metering.
Capacity100 – 2,500 Nm³/h
Wobbe control± 0.2 MJ/m³
Delivery18 – 22 wk
StandardRED II · ISCC-EU
S/01 ●

SRP/MRP Reduction & Metering Stations

HP · MP · LP — active / monitor line
Complete SRP/MRP stations engineered to the site — regulators, isolation and relief valves, odourisation and fiscal metering, commissioned to SCADA.
Inletup to 8.4 MPa
Outlet0.1 – 1.6 MPa
Capacityup to 80,000 Nm³/h
RedundancyActive / Monitor
S/02 ◆

CCGT Fuel-Gas Preparation Systems

Turbine-grade · dual-fuel · GT/EPC-ready
Complete fuel‑gas conditioning trains for combined‑cycle and cogeneration plants: filter‑coalescer, heater, fiscal metering, reduction and ESD.
Capacityup to 120,000 Nm³/h
Inletup to 8.4 MPa
Superheat+20 K min.
StandardEN 1776 · API 6D
S/03 ◆

Hydrogen Systems

350/700 bar refuelling stations · H₂ transport
Turnkey hydrogen refuelling stations (350/700 bar) and Type 4 cylinder transport bundles — with partners Resato, MAXIMATOR Hydrogen, Hexagon Purus.
Pressure350 / 700 bar
Capacity200 – 2,000 kg/day
ProtocolSAE J2601 A/B/C/D
TransportType 4 · up to 1,100 kg H₂
03Engineering in-house

From P&ID to as-built documentation.

Design, prefabrication, installation, commissioning — one contract, one project engineer. Process, mechanical, electrical and automation engineers sit side by side — nothing is outsourced, nothing is re‑learned from scratch between disciplines.

03 / i · Process design

Clear, verifiable, precise process documentation.

Every Intergaz system is built on a reviewed P&ID, line list, instrument index and cause‑and‑effect matrix — documents your approving engineer already knows and trusts.

  • a.
    P&IDs per ISA S5.1 / ISO 10628Revision control: IFA → IFC → as-built
  • b.
    HAZOP and LOPA facilitationSIL verification per IEC 61511, with your approving engineer on site
  • c.
    Relief valve sizing per API 520 / 521Flare and vent dispersion modelling where the site requires it
  • d.
    Functional safety and C&E matricesESD and F&G logic, fully tested and signed off in FAT
03 / ii · 3D mechanical design

Every skid, every shelter — modelled first, fabricated second.

Before we cut a single metre of pipe, we model the whole installation in 3D. You receive a navigable model, interference‑free piping, weight‑balanced transport frames and a complete fabrication package.

  • a.
    Parametric skid and shelter modelsCentre-of-gravity and transport reports
  • b.
    Routed piping and isometric drawingsSpool sheets and weld maps, ready for the workshop
  • c.
    Steelwork and weldment packagePainted to ISO 12944 for offshore and coastal sites
  • d.
    Clash-free model handoverIntegrated with your plant model
04Anatomy of a system

How Intergaz engineers the fuel-gas preparation train for a CCGT.

V‑101 INLET 8.4 MPa F‑101 FILTER / COALESCER FT FE‑102 USM METER PCV‑103 REGULATOR E‑104 HEATER · +20K AI‑105 GC SAMPLE TAP ESD SDV‑106 EMERGENCY SHUTDOWN GT TURBINE SIEMENS / GE / MAN FLOW ▸▸▸ CH₄ · C₂H₆ · CO₂ · N₂ — CCGT FUEL, 8.4 MPa AT INLET, 2.7 MPa AT TURBINE
01 · Inlet conditioning

Double block‑and‑bleed, filter‑coalescer to 99.98% at 0.3 µm, low‑pressure shutdown.

02 · Fiscal measurement

Ultrasonic meter with EVC and redundant p/T measurement — AGA‑9 compliant, ± 0.5% class.

03 · Conditioning

Active/monitor regulation plus electric or glycol superheat to +20 K above dew point.

04 · Protection

SIL‑rated ESD valve, F&G detection, 2oo3 logic, MOC per IEC 61511 — signed off in FAT.

05How we deliver

Five stages. One contract.

From first enquiry to signed as‑built documentation — the same project engineer accountable at every stage.

01
Enquiry and concept
Stage 01 · Week 0–2

Enquiry, sizing and concept

Process data review, meter and equipment sizing, preliminary heat and mass balance, a budgetary offer with a realistic lead time.

OutputConcept + budget offer
Stage 02 · Week 2–8

Detailed engineering

P&ID to IFA, datasheets, instrument index, HAZOP workshop, SIL determination, 3D model and full fabrication drawings.

OutputIFC drawing package
Stage 03 · Week 8–18

Manufacture and factory test

Skid fabrication, welding, pressure test, painting, electrical assembly and a witnessed factory acceptance test.

OutputSigned FAT protocol
Stage 04 · Week 18–22

Installation and commissioning

Site delivery, mechanical and electrical hook‑up, purge, loop checks, SCADA integration and a site acceptance test with the operator present.

OutputSAT + as-built documentation
Stage 05 · Lifecycle

Service, re-verification and overhaul

Scheduled maintenance, MID re‑verification in our own laboratory, spares held in stock and a hotline for grid operators.

ResponseEU-wide service
06Quietly, since 1990

Four decades of gas work, in numbers.

Numbers we track. Each one is the result of one team, steadily getting better at its work — not a headline strategy.

Years on stream
43yrs
Continuous gas measurement, since 1990.
Meters legalised
1.4million
Diaphragm, rotary, turbine — our own MID‑D line.
Systems delivered
180+
Turnkey stations, biomethane plants, CCGT skids.
Uptime
99.7%
12‑month rolling average, installed base.
07Selected projects

Delivered quietly, still on stream.

Selected projects from our reference portfolio — the full list is on the Projects page.

SCROLL ▸

ORLEN
Włocławek · Power generationGas preparation station for a CCGT block
PL · Kuyavia-Pomerania

Design (3D), supply, installation and commissioning of a complete gas preparation station: filtration, metering, reduction, heating, process analytics and boiler house — with automatic line switching and DCS integration.

Capacityup to 100,000 Nm³/h
Boiler house3 × 1 MW
ScopeTurnkey
ORLEN
Dolna Odra · Power generationGas preparation station for a CCGT block
PL · West Pomerania

Design, supply, installation and commissioning of a complete gas preparation station for a combined‑cycle block: filtration, metering, reduction, heating and process analytics, with DCS integration and remote control.

Capacityup to 250,000 Nm³/h
Boiler house3 × 3.5 MW
ScopeTurnkey
GAZ-SYSTEM · NET4GAS
Cieszyn · TransmissionPL–CZ border metering station
PL / CZ · border

Design, supply and commissioning of two DN300 ANSI600 fiscal metering lines with Q‑Sonic and SM‑RI‑2 meters with automatic lubrication — fiscal measurement between Poland and the Czech Republic.

Pressure50 bar
Lines2 × DN300
MetersQ-Sonic · SM-RI-2
HONEYWELL
France · UK · GermanyInstallations with the Encal 3000 process chromatograph
Biogas quality analysis

Complete installations with the Honeywell Encal 3000 process chromatograph for grid‑injected biogas quality analysis — 3D design, supply chain build, prefabrication, FAT and delivery.

France350 units
UK20 units
Germany8 units
GAZ-SYSTEM
Kościan · Gustorzyn · OdolanówPoland's largest transmission hubs
PL · Transmission

Design, supply and commissioning of 60 metering lines with Q‑SonicPLUS DN300 ANSI600 ultrasonic meters and two complete sets of process chromatographs — process measurement at the hub.

Metering lines60
Accuracy± 0.5 %
MeterQ-SonicPLUS
All projects
08Standards · certifications · accreditations
ISO 9001
Quality
MID Module D
Measuring instruments
ATEX 2014/34/EU
Explosive atmospheres
PED 2014/68/EU
Pressure equipment
IEC 61511 · SIL
Functional safety
AGA‑9 · ISO 17089
Ultrasonic measurement
ISO 6976 · 10723
Gas calorific value
EN 1776 · 12186
Gas stations
ISCC‑EU · RED II
Biomethane sustainability
09Contact

Tell us what you're building.

A single meter replacement or a 120,000 Nm³/h CCGT fuel‑preparation train — send us the brief. We'll reply with next steps and a realistic lead time.

Sales and quotes
Quotes and technical enquiries
Service and re-verification
Re-verification, inspections, repairs